|
|
GGET YOUR LICENSE! The Quad-County Amateur Radio Club invites you to attend free classes that will help you prepare for the FCC Technician exams and get your license! Classes are every Thursday begining Thursday, July 14 at 6:30 pm, and will be held at the Clearfield County 911 Center, 911 Leonard Street, Clearfield. The class will be taught under the supervision of an ARRL Certified Instructorby a team of qualified, active hams who will be on hand to help every student over the rough spots. Additionally, our local mentors will be available between classes to answer any questions which may come up while students are studying at home.
 These classes will continue for four weeks, and will end with a Volunteer Exam session at the 911 Center on Thursday, August 11 at 6:30 pm. The material is appropriate for all ages from 10 to 110, however parents of those under 13 are especially encouraged to sit in with their children to provide any needed support. The course consists of the material you will need to know in order to take and pass the FCC license exams, and will follow the material in the ARRL License Manual Second Edition, which although not required is available from the ARRL or other vendors for the list price of $29.95 or through the Quad-County Amateur Radio Club at a substantial discount.
It's easier than you think to get your license. Our instructors guide you past the hurdles and lead you to the finish line!
Topics to be covered include every group of questions on the FCC Technician Exam Element 2:
SUBELEMENT T1 – FCC Rules, descriptions and definitions for the amateur radio service, operator and station license responsibilities
SUBELEMENT T2 – Operating Procedure
SUBELEMENT T3 – Radio wave characteristics, radio and electromagnetic properties, propagation modes
SUBELEMENT T4 – Amateur radio practices and station set up
SUBELEMENT T5 – Electrical principles, math for electronics, electronic principles, Ohm’s Law
SUBELEMENT T6 – Electrical components, semiconductors, circuit diagrams, component functions
SUBELEMENT T7 – Station equipment; common transmitter and receiver problems, antenna measurements and troubleshooting, basic repair and testing
SUBELEMENT T8 – Modulation modes; amateur satellite operation, operating activities, non-voice communication
SUBELEMENT T9 – Antennas, feedlines
SUBELEMENT T0 – AC power circuits, antenna installation, RF hazards
Course materials:
Lesson Plan: 
 OON MAY 24, the ARRL renewed the Special Service Club status for the Quad-County Amateur Radio Club. QCARC has been an ARRL Affiliated Club since 1978, and became a Special Service Club in 1985. This renewal indicates the Club’s continuing commitment to providing additional services to its members and the communities it serves.
Is it a big deal? Yeah, it kind of is. Of the 43 ARRL Affiliated Amateur Radio Clubs in the Western Pennsylvania Section, the Quad-County Club is one of only three Special Service Clubs currently listed in the ARRL online Club Directory. Nationwide, only 137 SSC clubs are so designated from 2,000 ARRL Affiliated clubs. The national average is under 7% of all ARRL Affiliates are SSCs.
A Special Service Club is not “bigger and better” than other clubs; the designation is conferred upon those clubs that in addition to the usual ham radio activities have made an extensive effort to reach out to their members and communities, provide education and technological expertise to their members and the public, encourage and assist their members in keeping their operating skills sharp for emergency communications should the need arise, and present Amateur Radio to the public in a positive light, attracting new members and new hams by their activities rather than promoting with empty words.
The following description of Special Service Clubs is from the ARRL:
"TRULY SPECIAL Amateur Radio clubs are well balanced in their programs for serving the community, developing club members’ Amateur Radio skills and social activities, striving each year to build on their successes to improve their effectiveness. The objective of the ARRL’s Special Service Club program is to help good clubs organize and focus their efforts on those things that really count. Being an SSC should mean that members have certain skills, that the club as a group has the ability to improve service inside and outside the Amateur Radio community, and that it does so when needed.
To be accepted under the ARRL SSC program, a club must be actively involved in each of the following areas:
- New Ham Development and Training
Purpose: Develop an effective, coordinated program of public relations, recruiting, training and ongoing assistance targeted to prospective hams in your community to foster needed growth in Amateur Radio.
- Public Relations
Purpose: Establish an effective Amateur Radio presence in your community, including contact with local media and coverage of your activities; Public Information Officer appointment.
- Emergency Communications
Purpose: Club members should become skilled in communicating effectively during communications emergencies and be prepared to assist when needed; Official Emergency Station appointment and participation in ARES.
- Technical Advancement
Purpose: Continuing education in the technical aspects of Amateur Radio to ensure that your club members are technically competent, familiar and comfortable with modern radio-electronics technology; Technical Specialist appointment.
- Operating Activities
Purpose: Active participation as a club in one or more major operating or operating support activities to ensure that your club maintains a high level of operating skill.
- Miscellaneous Activities
Purpose: Every active club has its special interests and activities that make it unique, that give it special personality. At least three such activities are required to become a Special Service Club.”
 The Quad-County ARC May meeting was held Friday, May 20. Despite being the weekend of the Dayton Hamfest, there was a reasonable turnout. Routine business was conducted, the outstanding Spring Banquet bills were submitted for reimbursement, and several people volunteered for Club support positions.
Beginning his term as Technology Specialist is Lars Kvant SM7FYW. If anyone has technology questions, feel free to ask Lars! It’s only natural for Joe W3BC to accept the duties of Public Information Officer, which he did at the meeting.
Field Day discussion resulted in the formation of a committee to look into a location for this year’s effort. By a poll of members present, it will not be held at the EOC this year, but at the Fairgrounds or another suitable park. More details will follow as soon as arrangements have been made.
After the Business Meeting, the coffee and donuts were served, and the evening’s program began. Lars SM7FYW and Don KB3LES put on a very interesting program about radio fox hunting, and discussed the antennas, techniques and technology it takes to find an unknown transmitter.
A drawing was held for one of Don’s antennas that he kindly donated to the club. The lucky winner was Bryan Simanic WA3UFN from DuBois.
Next month’s meeting will be the finalization of Field Day planning, and the program will be Tweak and Peak night. Steve Waltman, KB3FPN will bring a commercial communications service monitor to help check out rig performance and tuning. Bring your VHF and UHF equipment, and Steve will help you get the most out of it!
Photo Gallery
Click for for full screen and other controls…
[showtime]
 Well, as most of you already read, I will show you how to have a chance catching one of those elusive Foxes…
So, today I went to the local hardware store and got some plastic pipe, T’s, 4 way thingies and a pair of hose clamps, the tape measure itself, comes from a garbage bin at work, so its a little bit too thin, but works fine anyway. Apart from that, you also need a few feet RG-58, some electrical tape and 5 inces of 16 gage copper wire.
I was really going to let you come down to the meeting, to get the rest of the dimensions, but decided to give them to you here ;-)
Schedule 40 plastic pipe, think its 3 feet, about $ 1,67, 1 Tee end, that fits the pipe, 2 cross pieces, also same size, a few cents each…. ;-) You will also need 2 hose clamps, that fits the cross things.
 Cut the plastic pipe into 3 pieces, 11 3/8 , 6 7/8 and one more 11 3/8. Put the T on the one end of the 11 3/8 pipe, then put the one cross piece on the other end, next stick the 6 7/8 pipe into the already assembled parts, then the last cross piece onto the 6 7/8 and last but not least, the 3rd piece of pipe, its going to come out something like this: ———————————->
Now to the tape measure itself, cut one piece 41 3/8 inch, two pieces 17 3/4 inch and one piece 35 1/8 inch, you can use ordinary pair of scissors, but be careful, the ends gets really sharp! (put some tape over ends)
Attach the 35 1/8 to the T, make sure its centered, (use electrical tape) next file of about 1/8 inch of the paint on the one end of both 17 3/4 pieces, attach the two 17 3/4 onto the middle cross piece with the hose clamps and finally the longest, to the next cross piece, using the tape again.
When all is put toghether, see picture 3, you will need to solder the 5 inch copper wire, which you have to shape like a U, presolder the ends first, solder it onto the feedpoint, (dont overheat, plastic will melt) then solder your RG-58 to the same point, coax running towards the handle…..
I hooked mine up to my Bird, and it shows very low SWR, so good luck, and if you are interested or have questions, come down to the meeting, and we will help ;-)
Lars FYW
 The April Quad-County ARC meeting featured a very interesting program on APRS presented by Carmine Prestia K3CWP and Woody Brem K3YV. Twenty-one amateurs were in attendance—some from as far away as Clarion and Emporium—and all four counties were represented. President Doug W3DWR called the meeting to order and during the brief business meeting the upcoming Spring Banquet plans were finalized, Field Day discussion was opened and committee reports were heard.
The business meeting was adjourned and the program was presented. Carmine K3CWP and Woody K3YV discussed their use of APRS to track Santa as he visits the neighborhoods in State College every year. They explained how parents can see when Santa’s firetruck will be approaching their neighborhood and take their kids out to see him every Christmas Eve, and the positive public response this has generated.
Carmine demonstrated how this worked by showing their path to the meeting using the online map at aprs.fi. Woody explained the construction of the “dot-box” which is the self-contained APRS rig he constructed inside a toolbox. AS Woody passed his dot-box around the room for the members to look at, Carmine discussed how the boxes were mounted on the firetrucks.
The program was very well received, as indicated by the number of questions from the hams in attendance. There was ample opportunity to discuss APRS technology with the guests and our members who have been using APRS. There were a number of APRS stations on display. Scott W3EOD brought his Kenwood TM-D7 Hand-held APRS transceiver and wrist-mounted GPS that he uses on the trail, W3BC brought his Kenwood TM-D710A and his “Frankenstein” rig, which he constructed from old equipment in his junkox for very little cash outlay. WA3UFN’s Yaesu FTM-350R flexed its APRS muscles, and the equipment used to support the N3QC-2 APRS Fill-in digipeater at the EOC was on display as well.
According to many comments received this was the best Quad-County meeting in quite a while, and we are trying to have more meetings like this one in the future. We hope to see you at the next one!
Photo Gallery
Click on an image to see it full size.
[slideshow]
On our “Welcome to Amateur Radio” page, we hope to list at least one Elmer for each community we have selected. By volunteering, you will become your community’s “go to” person for new hams and those looking to become hams. This is a very important part of the hobby that has given you so much. Please do your part and give back to your community and to your hobby.
If you are ready, willing and able to serve responsibly, please take a moment to register as your community’s Amateur Radio Ambassador.
Continue reading Calling All Elmers!
|
|
Loading ...
