|
|
— As of May 2020 the N3QC WIRES-X link has been disconnected. —
This article was originally posted January 15, 2016
Just above the horizon – WIRES-X! Recently you may have heard some rather odd noises and unlikely QSOs taking place on the N3QC, 147.315 repeater. The latest update to our repeater was added January 12, 2016 when the Yaesu Wires-X Voice Over Internet Protocol (VOIP) was added. More information will follow as we decipher some of the information and operational aspects of this new mode.
In case you didn’t hear, one of the first QSOs was a 3,565 mile digital contact with a station in England. The English ham was traveling to his home QTH while we were heading down the road in Du Bois, after the brainstorming session of getting the WIRES-X operational. Seeing the information showing a station that was just over 3500 miles away displayed on the radio’s display was quite a surprise!
The contacts are not totally automatic, you actually have to initiate a connection with one of the many WIRES-X nodes around the world. The connection can be made with either a Yaesu FTM-400 in digital mode or, as it it setup on the 147.315 repeater, any analog FM two-meter transceiver with a DTMF keypad (otherwise know as a touch-tone pad) connected to the transceiver. The digital connection to WIRES-X on the repeater is not available as it is set for analog only so that all can use it. You need to know the node number of the location that you want to connect, enter that on the DTMF keypad and the connection should be established. The digital mode displays much more information and has much more utility as well but as mentioned the digital radio is not needed, even a hand-held 2 meter rig can activate and use the system.
This is just a brief overview of the WIRES-X system, there will be much more to come on this website and at the QCARC regular meetings. Stay tuned for some very interesting experiences with WIRES-X!
January 16 article addition
I expect there are more questions about WIRES-X, since the announcement at the January Club meeting. Even though I was half of the team that set it up, I still have questions. The best place to begin to learn about the operation is to go directly to the Yaesu WIRES-X web site. Toward the left top of the page you will notice several tabs to connect to information that will better describe what WIRES-X is all about. The member log-in is for registered node users, you don’t need to worry about that part.
The three main information tabs:
The “What is WIRES-X?” tab gives an overview of the system.
The “User page” tab has a very good description, with good pictorials, of the way the system operates. Keep in mind this shows a digital radio operation but it is informative for both digital and analog modes.
The “WIRES-X ID list” tab will take you to the page that lists all of the WIRES-X nodes around the world and you’ll be able to see if there are any located near a city that you may want to talk to. You can sort the lists by clicking on the header for each column: call sign, city, state, country. Keep in mind the node list changes everyday as new nodes are registered.
The 147.315, N3QC repeater WIRES-X system is operating in the analog mode so that everyone can use it.
Stay tuned for more information as it relates to the N3QC/R WIRES-X system.
January 21, 2016 article addition
The WIRES-X room node will be connected for the time being. This should enable any one who connects to be able to more easily to use the system. To connect to a node room at a distant location, you will need a DTMF, touch-tone pad, on your microphone or hand-held, then you will need to know the node room number, available on the Yaesu WIRES-X web site . Remember to select the WIRES-X ID list tab to view the node number list.
February 3, 2016 article addition
So far the WIRES-X connection has served us well. I think that one of the biggest advantages that I’ve heard is that folks who may have moved from the area may now have the opportunity to get into the local repeater and talk to others they know. This has been proven out with K3AHS, Ed who is able to get into the 147.315 repeater, from his home in Texas, to check into the Sunday net and at other times to talk to hams who are in the area that he grew up.
The local room node is still connected, no issues appear to have resulted in the full time connection. In order to connect to another node you first need to disconnect from the local room by pressing the ” * ” touch-tone pad button. Then listen for the disconnect acknowledgement of an “H” in CW (4 dots, they’re sent fast). Once you hear the “H” enter the node room number of the distant location with a leading ” # “, via the touch-tone pad, to connect then talk to hams from that area. Remember to read up on the information contained in the above links. This is a system where skimming or guessing just will not work, you have to play by the WIRES-X rules! Remember to play by the FCC rules too and identify when connecting to the nodes.
In a shocking development, Joe W3BC has finally come to his senses and put out a modest but informative edition of the Parasitic Emission newsletter. You may download it here:
 Parasitic Emission, Volume 43, Number 1, April 2017
The National Weather Service Flood Safety Awareness Week Begins March 27. Considering we experience flooding in our area rather often, it is likely worth your time to check out the National Weather Service flood safety week web page at http://www.weather.gov/ctp/floodSafetyWeek
The week starts out with information on the continuing effort to modernize the hydrologic information that enables the general public to be aware of water levels in bodies of water in their areas. An interactive, real time hydrologic map of PA.
Toward the bottom of Monday’s page are a couple downloads in .pdf format that may be of interest.
One of my favorite topics is the “Turn Around Don’t Drown” information that is available, that EVERYONE should follow. If people do not follow the simple phrase they are risking not only their own life and those who may be in the vehicle with them but also the lives of the rescue responders. The “Turn Around Don’t Drown” campaign is highlighted Tuesday.
The balance of the week includes; the causes and severity of floods, flood insurance and flood safety.
Please take some time to refresh yourself of flooding issues and the safety points that everyone should be aware of.
I know this is not directly related to amateur radio but it is directly related to neighborhood safety.
It may even be directly related to your safety!
National Weather Service Pittsburgh will be conducting a BASIC SKYWARN course at the Punxsutawney Weather Discovery Center 201 N Findley St on Thursday April 27, 2017 starting at 6PM.
To register, email marlene@weatherdiscovery.org
This course is open to ANYONE interested in Weather. Hams are encouraged to attend. If you are a current SKYWARN observer for Pittsburgh NWS, they request observers attend a course every 5 years to remain current.
 Spring really is not too far away and with the change of seasons some rather interesting but destructive weather can occur. One of the more serious weather phenomenons we have to occasionally deal with is the tornado. While not a frequent issue, it is one that we need to be prepared for. Understand the Tornado Watch and Tornado Warning Alerts. Be sure your cell phone has the emergency alerts function turned on. There are numerous weather advisory apps for Smartphones that are very helpful.
Check out a two-minute N.W.S. video on preparing for a tornado at: https://youtu.be/uE66ganofF0
Another weather issue we have to deal with is the severe thunderstorm. It was only in 2016, that the Clearfield area was hit with thunderstorms that materialized and stalled over the area. These storms produced flooding unseen by many in some fifty-plus years.
Following is the synopsis of the 2016 Clearfield severe weather from the National Weather Service.
1945EST0
000EST 0 0 0.00K 0.00K Flash Flood
A small, but potent thunderstorm developed over Clearfield County just north of the town of Clearfield just before 22:00Z Thursday June 2nd, 2016. The storm moved ittle and intensified, and by 23Z was producing very heavy rain. The storm sat over the Clearfield-Lawrence County Airport (KFIG) where 5.16 of rain fell essentially 3 hours.
Initially Flood Advisories were issued (2316Z), but as the storm sat in one spot, the advisory was upgraded to a Flash Flood Warning at 0038Z.
Significant flooding was reported near the town of Clearfield, with three homes flooded, and according to Clearfield County EMA, 21 people were rescued from their homes and taken to a shelter.
Shortly after midnight a house on West Front Street exploded when the owners tried to turn their power back on. Four residents of the home suffered unknown injuries.
Hardest hit areas were near Route 879 and Industrial Road (see fig 2), and multiple streets in downtown Clearfield including Turnpike, Nichols and Merrill Street.
A small, but potent thunderstorm developed over Clearfield County just north of the town of Clearfield just before 22:00Z Thursday June 2nd, 2016. The storm moved little and by 23Z was producing very heavy rain. The storm sat over the Clearfield -Lawrence County Airport (KFIG) where 5.16 of rain fell essentially 3 hours. Initially Flood Advisories were issued (2316Z), but as the storm sat in one spot, the advisory was upgraded to a Flash Flood Warning at 0038Z.
Significant flooding was reported near the town of Clearfield, with three homes flooded, and according to Clearfield County EMA 21 people were rescued from their homes and taken to a shelter. Fortunately there were no reports of serious injuries. Hardest hit areas were near Route 879 and Industrial Road, and multiple streets in downtown Clearfield including Turnpike, Nichols and Merrill Street.
If there is anything true about our world it is change! The changes on the NWS pages has been moved to April, as the information states.:
“Effective April 4, 2017, NWS will implement the next version of the forecast pages. Highlights will include a standardized look and feel, a mobile-ready landing page, and a completely new architecture with a modernized API. Please review the Service Change Notice for complete details.”
As part of our continued effort to modernize weather.gov, the National Weather Service (NWS) is upgrading our point forecast, zone forecast, and product pages. Once these changes go live on March 7, all existing bookmarks to forecast.weather.gov will change. Links to a forecast page will display an error message that includes a URL to the new location. You will need to update your bookmarks to continue to access our forecasts quickly after the upgrade. After March 7, the new URL can also be found by searching for your location from forecast.weather.gov or www.weather.gov. These changes will not impact office pages located at www.weather.gov
If you run an automated process to get NWS data from forecast.weather.gov, you will need to switch to the new developer API by March 7. Specifications for the new API can be found here.
The primary focus of the upgrade is to make the forecast pages more reliable during weather events, but there are some new benefits of new forecast pages that include:
-
Addition of 7-day hourly forecast information to the point forecast page
-
A new mobile-friendly landing and graphical/tabular forecast page
-
Low-bandwidth optimization for all pages, on a partial roll-out at launch
-
Option to automatically detect your location on a mobile device
-
A new widget mode that allows you to customize the information on the point forecast
We overhauled the architecture of our application platform to provide a more stable and consistent service to meet the demand of severe weather events. The platform also introduces a modernized API that will make it easier for web developers to create high-quality applications and services to share NWS data. The updated web site now provides a complete mobile-friendly experience with optimizations for low bandwidth and customized weather widgets. We also have new data centers located in College Park, MD, and Boulder, CO, to provide 100% backup capability for the operational data used within the forecast process.
We look forward to providing you with useful and timely information using our improved connectivity and new design.
For more details, please read our Service Change Notice.
Questions can be sent to kolly.mars@noaa.gov
As we’ve seen this winter, the weather can change rather quickly. Especially when traveling, we need to be prepared for those extremes during our winter travels. One of the biggest issues this winter has been the occurrence of white-outs. Often times these winter squalls materialized so fast there is no time to react and the ensuing results can be catastrophic, as we have seen in our locale.
Preparing for winter travel includes both the folks in the vehicle as well as the vehicle. Click on the Getting Traction graphic for more information about preparing yourself and your vehicle for travel during the winter. You can never be too safe!
Information from the ARRL is that the Amateur Radio Parity Act has been reintroduced in the US House as of January 13, 2017, as HR 555.
The article states that HR 555 is a continuation of efforts from late last year, “The wording of HR 555 is identical to the language of HR 1301, which passed the US House of Representatives by a unanimous consent vote in September 2016 during the 114th Congress, which adjourned in December.”
For more information see the website: http://www.arrl.org/amateur-radio-parity-act
The 2018 membership dues for the Quad County Amateur Radio Club are due. Please note the updated dues structure. 
A fillable .pdf can be downloaded using the following link: 2018 QCARC Membership Application
Please make checks payable to: Quad County Amateur Radio Club.
You can print the completed application, mail it to Quad County Amateur Radio Club, P.O. Box 599, Du Bois, PA 15801 or bring it to a meeting. Hope to see you at the meeting!
 11/15/2016
ARRL once again is calling on its members to urge their US Senators to support the Amateur Radio Parity Act (H.R. 1301) when it comes up in the Senate during the “lame duck” session of Congress that adjourns in mid-December. The House of Representatives approved the bill in September, but if the Senate does not follow suit, the bill will die, and the entire process will have to be repeated. ARRL Hudson Division Director Mike Lisenco, N2YBB, who chairs the ARRL Board’s Legislative Advocacy Committee and has been heavily involved in efforts to move H.R. 1301 forward, said today, “The clock is ticking!”
“We begin the e-mail campaign once again, as the US Senate returns to work this week after a month-long hiatus,” Lisenco said. “We were just beginning to build momentum in the Senate following the unanimous passage of the Parity Act in the House when Congress shut down for the 4 weeks prior to Election Day.”
The task is simple: Go to our Rally Congress page, enter your ZIP code, fill in your name and address, press enter, and e-mails will go directly to your Senators. Members may do this, even if they have already contacted their US Senators for support.
“We have to remind our legislators that we are still here and that we need the Amateur Radio Parity Act to become law,” Lisenco stressed. “We must to do this now as we have, at most, only 4 weeks left in the session to get the bill passed this year. Otherwise, we will have to begin the entire process in 2017 with a new 115th Congress.”
There are no guarantees, Lisenco said, and we are subject to the political bickering that goes on daily between the parties, despite the fact that the bill is truly a bipartisan effort. “In order to have a chance at overcoming political obstacles that have little or nothing to do with the legislation, we need our voices to be heard,” he said. “And we need that input today!”
September’s victory in the US House was the culmination of many years of effort on ARRL’s part to gain legislation that would enable radio amateurs living in deed-restricted communities to erect efficient outdoor antennas that support Amateur Radio communication. The measure calls on the FCC to amend its Part 97 rules “to prohibit the application to amateur stations of certain private land-use restrictions, and for other purposes.” While similar bills in past years gained some traction on Capitol Hill, it was not until the overwhelming grassroots support from the Amateur Radio community for H.R. 1301, and ARRL’s relentless and strident efforts on Capitol Hill that this bill made it this far.
As the amended bill provides, “Community associations should fairly administer private land-use regulations in the interest of their communities, while nevertheless permitting the installation and maintenance of effective outdoor Amateur Radio antennas. There exist antenna designs and installations that can be consistent with the aesthetics and physical characteristics of land and structures in community associations while accommodating communications in the Amateur Radio services.”
 American Radio Relay League, Chief Executive Officer, Tom Gallagher, NY2RF spoke at the Penn State Shenango Campus, Sharon, PA. The presentation was attended by approximately 80 amateur radio operators from clubs across the WPA section, Ohio and others. QCARC had two representatives at the event.
After Mr. Gallagher’s presentation, he opened the floor for questions and comments. An interesting challenge was presented to the attendees. The challenge was, while enjoying the coffee and donuts, folks were encouraged to introduce themselves to someone they didn’t know. This would serve both parties in expanding their amateur radio acquaintances.
|
|
Loading ...
